Table of Contents
Advertisement
d.
Do not overreach. Keep proper footing and balance at all times.
ables better control of the power tool in unexpected situations.
e.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, cloth-
ing and gloves away from moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
4.
power tool use and care
a.
Do not force the power tool. Use the correct power tool for your application.
the correct power tool will do the job better and safer at the rate for which it
was designed.
b.
Do not use the power tool if the Trigger does not turn it on and off.
tool that cannot be controlled with the trigger is dangerous and must be re-
paired.
c.
disconnect the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting the power tool acci-
dentally.
d.
store idle power tools out of the reach of children and do not allow per-
sons unfamiliar with the power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands of untrained users.
e.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many ac-
cidents are caused by poorly maintained power tools.
f.
Keep tools clean.
easier to control.
g.
Use the power tool, accessories and sockets etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed. Use
of the power tool for operations different from those intended could result in a
hazardous situation.
5.
service
a.
Have your power tool serviced by a qualified repair person using only identi-
cal replacement parts. this will ensure that the safety of the power tool is
maintained.
1.
Maintain labels and nameplates on the tool. These carry important safety infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.
Avoid unintentional starting. Prepare to begin work before turning on the tool.
SKU 65817
For technical questions, please call 1-800-444-3353.
Properly maintained tools are less likely to bind and are
speCiFiC saFetY rules
this en-
Any power
Page 5
Advertisement
Table of Contents
