Tool Use And Care - Chicago Electric 95313 Set Up And Operating Instructions Manual

2. dress properly. do not wear loose cloth-
ing or jewelry. contain long hair. Keep
your hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry, or
long hair can be caught in moving parts.
3. avoid accidental starting. Be sure the
power switch is off before plugging in.
Plugging in power tools with the Power
Switch on invites accidents.
4. remove adjusting keys or wrenches be-
fore turning the power tool on. A wrench
or a key that is left attached to a rotating
part of the power tool may result in personal
injury.
5. do not overreach. Keep proper footing
and balance at all times. Proper footing
and balance enables better control of the
power tool in unexpected situations.
6. use safety equipment. always wear ansi-
approved eye protection. Dust mask,
non-skid safety shoes, hard hat, or hear-
ing protection must be used for appropriate
conditions.

tool use and care

1. Only use the tool on a stable platform.
Attempting to use this tool on an unstable
platform can cause damage or injury.
2. do not force the tool. use the correct
tool for your application. The correct tool
will do the job better and safer at the rate for
which it is designed.
3. do not use the power tool if the power
switch does not turn it on or off. Any tool
that cannot be controlled with the Power
Switch is dangerous and must be replaced.
disconnect the power cord plug from the
4.
power source before making any adjust-
ments, changing accessories, or storing
the tool. Such preventive safety measures
reduce the risk of starting the tool acciden-
tally.
5. MaKE wOrKshOp Kid prOOF with pad-
locks, master switches, or by removing
starter keys. store idle tools out of reach
of children and other untrained persons.
Tools are dangerous in the hands of un-
trained users.
6. Maintain tools with care. Keep cutting
tools maintained and clean. Properly
SKU 95313 For technical questions, please call 1-800-444-3353
maintained tools are less likely to bind and
are easier to control. Do not use a damaged
tool. Tag damaged tools "Do not use" until
repaired.
7. check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tool's
operation. if damaged, have the tool
serviced before using. Many accidents are
caused by poorly maintained tools.
8. use only accessories that are recom-
mended by the manufacturer for your
model. Accessories that may be suitable for
one tool may become hazardous when used
on another tool.
9. nEVEr stand On tOOl. serious injury
could occur if the tool is tipped or if the
cutting tool is unintentionally contacted.
service
1. tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified per-
sonnel could result in a risk of injury.
2. when servicing a tool, use only identical
replacement parts. Use of unauthorized
parts or failure to follow maintenance instruc-
tions may create a risk of electric shock or
injury.
grinding wheel warnings
1. do not use a grinding wheel if it is
chipped, cracked, worn or out of balance.
You can check if the wheel has cracks not
visible to the human eye by hanging it up by
the central hole and tapping it with a non-
metallic object (i.e. screwdriver handle). If it
is in good condition it will produce a metal-
lic sound. A dull sound indicates a crack or
break. If it is out of balance, it will cause a
vibration while spinning.
2. Only use grinding wheels that fit the
arbor (7/8"). Do not try to change or modify
the mounting hole on a grinding wheel to
make it fit. Grinding wheel replacements are
available at Harbor Freight Tools, order part
number 8 off page 11 parts list.
3. do not overtighten the grinder lock cap
(9). Hand tighten it only. Overtightening may
cause the wheel to break or disintegrate.
rEV 07l
Page 3