Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
18 volt coRdleSS
Four Tool
coMbo pack
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
visit our website at: http://www.harborfreight.com
email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
Save thiS manual.
ITEM 68857
Advertisement
Table of Contents
Related Manuals for Chicago Electric 68857
Summary of Contents for Chicago Electric 68857
- Page 1 Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. ITEM 68857 18 volt coRdleSS Four Tool coMbo pack visit our website at: http://www.harborfreight.com...
-
Page 2: Table Of Contents
Water entering a power tool will increase the risk of electric shock. Page 2 For technical questions, please call 1-800-444-3353. Item 68857... -
Page 3: Personal Safety
Power tools are dangerous in the hands of untrained users. Item 68857 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: Battery Tool Use And Care
Kickback is the result of saw misuse and/or incorrect and reduces the chance of blade binding. operating procedures or conditions and can be avoided by taking proper precautions as given below: Page 4 For technical questions, please call 1-800-444-3353. Item 68857... - Page 5 Holding the work by hand or against your body Contact with a ″live″ wire will make exposed metal leaves it unstable and may lead to loss of control. parts of the tool ″live″ and shock the operator. Item 68857 For technical questions, please call 1-800-444-3353. Page 5...
-
Page 6: Additional Safety Warnings
Raynaud’s Disease should not use this tool. 5. Include vibration-free periods each day of work. Page 6 For technical questions, please call 1-800-444-3353. Item 68857... -
Page 7: Extension Cords
WARNING marking concerning Risk Risk of Explosion. of Eye Injury. Wear ANSI-approved Do not puncture, short, or open safety goggles with side shields. battery packs and do not charge damaged battery packs. Item 68857 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Specifications
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. caution: The use of optical instruments with this product will increase eye hazard. Page 8 For technical questions, please call 1-800-444-3353. Item 68857... -
Page 9: Setup
Drill / Driver Parts List and Diagram on page 19. Torque Setting Speed Ring (4) Selector (16) Chuck (2) Direction Work Light Switch Trigger (12) Bit Groove Battery Button Battery Pack (11) Item 68857 For technical questions, please call 1-800-444-3353. Page 9... - Page 10 Trigger (36) Plate (50) Saw Blade (6) Laser Switch (38) Trigger Lock Button (34) Spindle Lock Button (20) Laser Guide (14) Fence Adjusting Depth Gauge Knob (45) Depth Adjustment Knob (53) Page 10 For technical questions, please call 1-800-444-3353. Item 68857...
- Page 11 Flashlight components and controls note: For additional information regarding the parts listed in the following pages, refer to Flashlight Parts List and Diagram on page 20. Lens Cover (2) Trigger (9) Handle Item 68857 For technical questions, please call 1-800-444-3353. Page 11...
-
Page 12: Operation
• In addition to single or double-ended screwdriver bits, adapters with hexagonal shafts with matching socket heads can also be used. • Fix the torque setting low enough to allow a safety margin. Page 12 For technical questions, please call 1-800-444-3353. Item 68857... - Page 13 Loosen the Knob, which will allow the Plate to be moved. 3. After adjustment if the Fence is used, tighten the Fence Adjusting Knob. WaRninG! tighten Fence adjusting Knob before use. Item 68857 For technical questions, please call 1-800-444-3353. Page 13...
-
Page 14: Work Piece And Work Area Set Up
(not included) to prevent movement while working. or pets to prevent distraction and injury. 3. There must not be objects, such as utility lines, nearby that will present a hazard while working. Page 14 For technical questions, please call 1-800-444-3353. Item 68857... - Page 15 10. Remove the Battery Pack. desired hole. This will prevent the drill bit from slipping as the hole is started. 11. Clean then store the Drill indoors and out of children’s reach. Item 68857 For technical questions, please call 1-800-444-3353. Page 15...
- Page 16 (see warnings on page 4). 9. To prevent accidents, turn off the tool and 2. Use sawhorses to support the disconnect the Battery Pack after use. board or panel to be cut. Page 16 For technical questions, please call 1-800-444-3353. Item 68857...
- Page 17 4. After use, press the battery release latch on the front by rotating it up or down. of the Battery to release the Battery Pack from the Flashlight and slide it out of the Base to remove it. Item 68857 For technical questions, please call 1-800-444-3353. Page 17...
-
Page 18: Maintenance
NIOSH-approved dust mask/respirator while blowing dust out of motor using compressed air. Follow all safety precautions whenever diagnosing or servicing the tool. disconnect Battery pack and charger power supply before service. Page 18 For technical questions, please call 1-800-444-3353. Item 68857... -
Page 19: Parts Lists And Diagrams
Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 68857 For technical questions, please call 1-800-444-3353. Page 19... - Page 20 Front Light Circuit Board Spring Screw Main Housing Top Cover Handle Housing Tuning Fork Screw Trigger Bracket ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Page 20 For technical questions, please call 1-800-444-3353. Item 68857...
- Page 21 Connecting Screw Rod Lock Spring Locknut Lock Block Shaft Screw (M6x95) Left Housing Plate Gearbox Hex Wrench Bearing (6000) Depth Adjusting Knob Output Shaft Fence Lock Block 25 26 27 Item 68857 For technical questions, please call 1-800-444-3353. Page 21...
- Page 22 Red wire Gearbox Cover Black wire Left Housing Red wire Screw Black wire Ball Press Cover Bracket Reciprocating Lever Spring Straight Pin Top Pin Slide Bearing Right Housing Wool Washer Screw Page 22 For technical questions, please call 1-800-444-3353. Item 68857...
- Page 23 Reciprocating Saw assembly diagram Item 68857 For technical questions, please call 1-800-444-3353. Page 23...
-
Page 24: Warranty
limited 90 day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.