Download
Share
Print this page
Chicago Electric PROFESSIONAL Series Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Power Tool
  5. PROFESSIONAL Series
  6. Owner's manual & safety instructions
Chicago Electric PROFESSIONAL Series Owner's Manual & Safety Instructions

Chicago Electric PROFESSIONAL Series Owner's Manual & Safety Instructions

Orbital jigsaw
Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
ORBITAL
JIGSAW
WITH DUST BLOWER
AND LASER CUTTING GUIDE
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS mANUAL.
ITEM 69077

Advertisement

loading
Need help?

Need help?

Do you have a question about the PROFESSIONAL Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Chicago Electric PROFESSIONAL Series

Summary of Contents for Chicago Electric PROFESSIONAL Series

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    Table of Contents Safety ............2 Maintenance ..........12 Specifications ..........8 Parts List and Diagram ......14 Setup ............8 Warranty ............ 16 Operation ............ 9 WARNING SYmBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 3: Safety

    Electrical safety 1. power tool plugs must match the outlet. 4. Do not abuse the cord. Never use the cord for Never modify the plug in any way. carrying, pulling or unplugging the power tool. Do not use any adapter plugs with grounded Keep cord away from heat, oil, sharp edges power tools.
  • Page 4 power tool use and care 1. Do not force the power tool. Use the 5. maintain power tools. Check for misalignment correct power tool for your application. or binding of moving parts, breakage of parts and any other condition that may affect the The correct power tool will do the job better and safer at the rate for which it was designed.
  • Page 5 Jigsaw Safety Warnings (cont.) 11. WARNING: Some dust created by power sanding, 12. WARNING: Handling the cord on this product will sawing, grinding, drilling, and other construction expose you to lead, a chemical known to the State of activities, contains chemicals known [to the State California to cause cancer, and birth defects or other of California] to cause cancer, birth defects or reproductive harm.
  • Page 6 Grounding TO pREVENT ELECTRIC SHOCK AND DEATH FROm INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug.
  • Page 7 Extension Cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it.

  • Page 8: Specifications

    Specifications Electrical Rating 120V~ / 60Hz / 6.5A LASER LIGHT DO NOT STARE INTO BEAm Cutting Speed 500-3000 SPM max. Output: <1 mW, Wavelength: 630-665 nm CLASS II LASER PRODUCT This product complies with Stroke Length 5/8" 21 CFR 1040.10 and 1040.11 Diode Mfr.: Yueqing Dongke Electron Co., LTD, Xiaxue Industry Area, Shifan Town Yueqing Zhejiang 325608 P.R.

  • Page 9: Operation

    Operating Instructions Read the ENTIRE ImpORTANT SAFETY INFORmATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO pREVENT SERIOUS INJURY FROm ACCIDENTAL OpERATION: Turn the power Switch of the tool off and unplug the tool from its electrical outlet before adjusting tool or installing accessories.
  • Page 10 Installing the Rip Fence 1. Loosen the Fence Lock Knobs. 2. With the main guide of the Rip Fence facing downward, slide the bar of the Rip Fence into the slots on the Baseplate until it is the desired distance from the Blade. Bar of Rip Fence 3.
  • Page 11 General Operating Instructions Adjusting the Cutting Speed Use the Speed Dial to set the cutting speed from 1 (slow) to 6 (fast). Use the faster Speed Dial settings to cut softer workpieces. Figure 6 Adjusting the Cutting mode Use the Cutting Mode Lever to set one of the following cutting modes: a.

  • Page 12: Maintenance

    maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT SERIOUS INJURY FROm ACCIDENTAL OpERATION: Turn the power Switch of the tool off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
  • Page 13 Troubleshooting problem possible Causes Likely Solutions Tool will not start. 1. Cord not connected. 1. Check that cord is plugged in. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.

  • Page 14: Parts List And Diagram

    parts List and Diagram pLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 15 Assembly Diagram Item 69077 For technical questions, please call 1-800-444-3353. Page 15...

  • Page 16: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

69077