Supported Convert Dvi Desktop Resolutions; If You Have Display Issues When Starting Windows - Matrox Convert DVI Installation And User Manual

20

Supported Convert DVI desktop resolutions

Convert DVI supports the following common desktop resolutions (some
resolutions may not be supported on all display cards or DVI input devices):
• 800 ×600
• 1024 ×768
• 1280 ×720
• 1280 ×1024
• 1600 ×900
• 1600 ×1200
• 1680 ×1050
• 1920 ×1080
• 1920 ×1200
¦ Note
listed above have been tested and approved by Matrox for use with Convert DVI.
If you have display issues when starting
Windows
After connecting Convert DVI and starting your computer, if your primary
display is black, has an incorrect resolution, or your system does not detect your
primary display, one of the following issues may be the cause:
• Your system has incorrectly set your primary display resolution, or has
automatically set the Convert DVI as your primary display because the
Convert DVI is capable of using a higher resolution than the physical
monitor connected to your primary DVI OUT. If this happens, disconnect the
Convert DVI from your display card, restart your system and log on to
Windows, re-connect the Convert DVI to your display card's second DVI
OUT, and then follow the steps in
with Convert DVI"
• You have accidentally connected the Convert DVI to the DVI OUT on your
display card that is associated with your primary display. If this happens,
disconnect both the Convert DVI and your monitor from your display card,
connect your monitor to your display card's primary DVI OUT, restart your
computer, connect the Convert DVI to your display card's second DVI OUT,
and then follow the steps in
Convert DVI"
Chapter 3, Installing Your Matrox Software and Configuring Your Display
Other resolutions may work with Convert DVI, but only the resolutions
on page 17.
on page 17.
"Configuring your display settings for use
"Configuring your display settings for use with