Matrox Convert DVI Installation And User Manual page 41

DVI's internal memory, or Programmed to indicate that Convert DVI
currently has settings programmed to stand-alone mode.
For more information on stand-alone mode, see
to stand-alone mode"
Click View Current Settings to display the current control panel settings,
5
and the current stand-alone mode settings that are saved in the Convert
DVI's internal memory.
Under Lock/Unlock Control Panel , you can lock or unlock the Convert
6
DVI Control Panel, and create and manage your password. When the control
panel is locked, you won't be able to change any of the settings. This
prevents unintentional changes to the settings. To unlock the control panel,
you'll be required to enter a password.
¦ Note
If you can't remember your current password, you can retrieve it from
the Windows registry editor. Choose Start > Run , type regedit in the text box
provided, and then press
HKEY_CURRENT_USER\Software\Matrox\Convert\Password. The Convert
DVI's current password is under Data.
Under Keyboard Shortcuts , select Enable keyboard shortcuts if you
7
want to use shortcut keys to select various region of interest settings. You can
clear this option if you find that any of the keyboard shortcuts conflict with
other software on your system. For a list of keyboard shortcuts, see
"Keyboard shortcuts"
Programming Convert DVI to stand-alone mode
Before programming Convert DVI to stand-alone mode, make sure that you have
set your Convert DVI desktop resolution to match the resolution of the DVI input
device that you want to use with Convert DVI in stand-alone mode (see
"Configuring your display settings for use with Convert DVI"
¦ Note Only settings that have been applied to your video output will be
programmed to stand-alone mode. Therefore, make sure to click Apply on any of
the Convert DVI Control Panel pages where you have made changes before
programming to stand-alone mode.
After you have specified and applied your Convert DVI settings to your video
output, you are ready to use your Convert DVI in stand-alone mode. Click
Program Current Settings
Panel to copy your applied settings to the Convert DVI's internal memory. The
status window will indicate that programming is in progress, and display
Programmed
²Caution
Do not disconnect the Convert DVI's USB cable or power cord until
the programming process is complete. Doing so may damage your Convert DVI
hardware.
on page 33.
ENTER
on page 31.
on the Admin page of the Convert DVI Control
when the process is complete.
Using the Matrox Convert DVI Control Panel
"Programming Convert DVI
. In the registry tree, on the left, go to
on page 17).
33