Specifications; Installation Options; Features; Heating Specifications - Lopi Heritage Owner's Manual

Heritage stove lopi
Hide thumbs Also See for Heritage:
Table of Contents

Advertisement

6

Installation Options:

Freestanding Stove
Residential or Mobile Home
Horizontal or Vertical Vent

Heating Specifications:

Approximate Heating Capacity (in square feet)*......1,200 to 2,000 With Blower, 800 to 1,600 Without
Maximum BTU Input Per Hour...............................43,000 (NG & LP)
Minimum BTU Output on Low (with blowers on) .....23,384 (NG) 20,800 (LP)
Steady State Efficiency........................................up to 78% (NG), 81% (LP)
AFUE..................................................................71% (NG), 73.7% (LP)
*
Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature.
* *
Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent
of installed system. To measure the net BTU's, multiply the BTU input by the efficiency percentage.

Dimensions:

Fuel:

This heater is shipped in
natural gas (NG)
configuration but may be
converted to propane (LP)
using the included LP
conversion kit. The sticker
on top of the gas control
valve will verify the correct
fuel.

Electrical Specifications

Electrical Rating.........................................................115 Volts, 0.8 Amps, 60 Hz (92 watts on high)
Travis Industries

Specifications

The 6-5/8" diameter
starter section is 1-1/4"
above the top.
32"
100-01135

Features:

Ember Fyre ™ Burner for "Wood Fire" Look
Works During Power Outages
Optional Thermostat or Remote Control
Variable-Rate Heat Output
Blower Standard
Weight: 275
Lbs
27-3/8"
6-1/4"
Measure
Clearances
from the
Stove Top
20-3/8"
4 0 4 0 8 0 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Heritage ef iii

Table of Contents