Remote Control Configuration; Remote Feature Programming - Python 5206P Owner's Manual

Remote Control Configuration

Remote Feature Programming

The Responder LE and 1-way companion remote controls have op-
erations that can be configured to a user's personal preferences. The
following instruction directs you through the available programming
options for both remote controls.
Note: The remote control automatically exits programming mode after
30 seconds if no action is performed.
To enter Remote Features Programming mode:
Press and hold the
1.
mit LED turns on constant.
Release the
2.
Press and hold the
3.
transmit LED flashes twice and then turns on constant.
Release the
4.
Press the corresponding button using the following tables to set a
5.
desired feature option.
Once the desired feature option is set press and release the
6.
button once, then press and hold it again until the transmit LED
shuts off. This action saves the feature change.
Note: if step 6 is not performed the desired feature change re-
turns to its previous state.
© 2012 Directed. All rights reserved.
button on the remote control until the trans-
button.
button on the remote control until the
button.
19