Getting Started; Charging The Remote Control - Python 991 Responder LC3 Owner's Manual

~~~--------_._"----------"-----------_."-----------".---------"--".
__
.-------
Your Responder
LC
remote is powered by an internal rechargeable
battery that can only be serviced by an authorized Directed dealer_
Due to transit and storage time prior to your purchase, the battery
charge may have depleted _ To ensure proper operation, check the
battery level and connect the battery charger if not fully charged _See
Battery Information
and
Status Screen Icons
sections for more informa-
tion a bout the battery.
Charging the remote control:
1.
Plug the AC adapter into a
11 OV
AC outlet. Insert the mini-USB
connector into the mini-USB port located on the side of the
remote control (see diagram under
Responder LC 2-way).
The
text field will display'''• •'''' to indicate the remote control is
charging (The remote remains operational while charging and
can command the system).
2. Once fully charged the text field will display ,·'UIl .
3. The remote control is then ready for use. Disconnect the mini-
USB end from the remote control first and then the AC adopter
from the AC outlet.
Note
4 © 2009 Directed Electronics. All rights reserved.