Mep Aps Configuration; Mep Client Configuration - Planet MGSD-10080F User Manual

'flr' is the Frame Loss Ratio time interval.
Syntax:
MEP lm config [<inst>] [<prio>] [uni|multi] [single|dual] [10s|1s|6m|1m|6h] [<flr>] [enable|disable]
Parameters:
<inst> : Instance number
<prio> : OAM PDU priority
uni|multi : Destination address is unicast or multicast
single|dual : LM is single or dual ended
10s|1s|6m|1m|6h: LM period (10s -> 10 PDU pr. second)
<flr> : Frame loss ratio (in sec.)
enable|disable : enable/disable

MEP APS Configuration

Description:
MEP APS configuration
'prio' is the priority (PCP) of transmitted APS frame
'uni|multi' is selecting uni-cast or multi-cast transmission of APS frame
'laps|raps' is selecting ELPS or ERPS protocol
'octet' is the last octet in RAPS multicast MAC.
Syntax:
MEP aps config [<inst>] [<prio>] [uni|multi] [laps|raps] [<octet>] [enable|disable]
Parameters:
<inst> : Instance number
<prio> : OAM PDU priority
uni|multi : Destination address is unicast or multicast
laps|raps : Selection of Linear or Ring APS type
<octet> : The last octet in RAPS multicast MAC
enable|disable: enable/disable

MEP Client Configuration

Description:
MEP Client configuration
521
User's Manual of MGSD-10080F