Configuration Backup - Planet MGSD-10080F User Manual

Buttons
: Click to upgrade firmware.
DO NOT Power OFF
Do not quit the Firmware Upgrade page without pressing the "OK" button after the image is
loaded. Or the system won't apply the new firmware. User has to repeat the firmware
upgrade processes again.

4.2.22 Configuration Backup

This function allows backup and reload the current configuration of the Managed Switch to the local management station. The
Configuration Backup screen in
Save configuration except IP Address feature is almost the same with Save configuration, except the IP address will not be
saved.
You can save/view or load the switch configuration. The configuration file is in XML format with a hierarchy of tags:
Header tags:
Section tags:
Module tags:
Group tags:
Parameter tags:
Configuration parameters are represented as attribute values. When saving the configuration from the switch, the entire
the Managed Switch until the update progress is complete.
Figure 4-2-26 appears.
Figure 4-2-26: Configuration Save Page Screenshot
<?xml version="1.0"?> and <configuration>. These tags are mandatory and must be present
at the beginning of the file.
<platform>, <global> and <switch>. The platform section must be the first section tag and
this section must include the correct platform ID and version. The global section is optional
and includes configuration which is not related to specific switch ports. The switch section is
optional and includes configuration which is related to specific switch ports.
<ip>, <mac>, <port> etc. These tags identify a module controlling specific parts of the
configuration.
<port_table>, <vlan_table> etc. These tags identify a group of parameters, typically a table.
<mode>, <entry> etc. These tags identify parameters for the specific section, module and
group. The <entry> tag is used for table entries.
User's Manual of MGSD-10080F
90