Evc Port Addr; Evc Port L2Cp; Evc Policer - Planet MGSD-10080F User Manual

EVC Port Addr

Description:
Set or show port address match mode.
Syntax:
EVC Port Addr [<port_list>] [<addr_mode>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<addr_mode>: IP/MAC address mode: source|destination

EVC Port L2CP

Description:
Set or show port L2CP mode
Syntax:
EVC Port L2CP [<port_list>] [<l2cp_list>] [<mode>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<l2cp_list>: L2CP ID list (0-31). BPDU range: 0-15, GARP range: 16-31
<mode> : The mode takes the following values:
normal : Default forwarding
forward : Forward
redirect : Redirect to CPU

EVC Policer

Description:
Set or show EVC bandwidth profile.
Syntax:
EVC Policer [<policer_id>] [enable|disable] [<policer_mode>] [<cir>] [<cbs>] [<eir>] [<ebs>]
Parameters:
<policer_id> : Policer ID (1-128)
511
User's Manual of MGSD-10080F