Table of Contents
Advertisement
You can start using your OWC Mercury Elite RAID Rack storage solution
immediately with a few easy steps if you don't want to read the entire
manual. The drive solution is formatted for a Macintosh and ready to use
right out of the box. If you're using a Mac, Simply follow the instructions
on this page and dive in!
1. Open the boxes and remove the above items
FireWire 800
USB 2.0
2. Look at the back of the storage enclosure. You need to choose which
interface you want to use - FireWire 800 or USB 2.0.
3. Plug the power cable in and turn the power switch on. Your
drives will mount on the desktop and you can start using them.
Quickstart Guide
Chapter 1
Page 2
Advertisement
Table of Contents
