LevelOne WBR-3408 User Manual page 92

Advanced Administration
Data - Logs Screen
Downloaded from www.Manualslib.com
Logs
Current Time The current time on the Wireless Router is displayed.
Log Data Current log data is displayed in this panel.
There are three (3) buttons
Buttons



Include in Logs
Use these checkboxes to determine which events are
Include (Checkbox-
included in the log. Checking all options will increase the
es)
size of the log, so it is good practice to disable any events
which are not really required.






Syslog
Data is not sent to a Syslog Server.
Disable
The Syslog data is broadcast, rather than sent to a specific
Broadcast on LAN
Syslog server. Use this if your Syslog Server does not have
a fixed IP address.
Send to this Syslog If your Syslog server has a fixed IP address, select this
option, and enter the IP address of your Syslog server.
Server
manuals search engine
Refresh - Update the log data.
Clear Log - Clear the log, and restart it. This makes
new messages easier to read.
Send Log - E-mail the log immediately. This is only
functional if the E-mail screen has been configured.
Attempted access to blocked sites - If checked,
attempted Internet accesses which were blocked are
logged.
Connections to the Web-based interface of this
Router - If checked, this will log connections TO this
Router, rather than through this Router to the Internet.
Router operation - If checked, other Router operations
(not covered by the selections above) will be logged.
Known DoS attacks and Port Scans - If checked,
Denial of Service attacks, as well as port scans, will be
logged.
Outgoing (Internet) connections - If checked, the
outgoing Internet connections are logged.
Access Control - If enabled, the log will include at-
tempted outgoing connections which have been blocked
by the "Access Control" feature.
92