LevelOne WBR-3408 User Manual page 64

11g wireless broadband router
Hide thumbs Also See for WBR-3408:
Table of Contents

Advertisement

Operation and Status
Data - Status Screen
Downloaded from
www.Manualslib.com
Internet
Connection Method
Displays the current connection method, as set in the Setup
Wizard.
This indicates the current status of the Internet Connection
Connection Status
If there is an error, you can click the "Connection Details"
button to find out more information.
Internet IP Address
This IP Address is allocated by the ISP (Internet Service
Provider). If using a dynamic IP address, and no connection
currently exists, this information is unavailable.
WAN MAC Address
It displays the MAC address for the WAN.
Click this button to open a sub-window and view a detailed
Connection Details
description of the current connection. Depending on the
type of connection, a "log" may also be available.
LAN
The IP Address of the Wireless Router.
IP Address
Network Mask
The Network Mask (Subnet Mask) for the IP Address
above.
This shows the status of the DHCP Server function. The
DHCP Server
value will be "Enabled" or "Disabled".
This shows the MAC Address for the Wireless Router, as
MAC Address
seen on the LAN interface.
Click this button to access the PC Database feature.
PC Database
Wireless
The current region, as set on the Wireless screen.
Region
Channel
This shows the Channel currently used, as set on the Wire-
less screen.
Wireless AP
This indicates whether or not the Wireless Access Point
feature is enabled.
SSID 1/2
It displays the name of the SSID 1/2.
Broadcast Name
This indicates whether or not the SSID is Broadcast. This
setting is on the Wireless screen.
MAC Address
The MAC (physical) address of the Wireless Access Point.
Indicates whether the Wireless On/Off Schedule is Enabled.
Wireless Schedule
You can also use the button to Enable or Disable this fea-
ture.
manuals search engine
Active - Connection exists
Idle - No current connection, but no error has been
detected. This condition normally arises when an idle
connection is automatically terminated.
Failed - The connection was terminated abnormally.
This could be caused by Modem failure, or the loss of
the connection to the ISP's server.
64

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents