Removal and replacement procedures
Bluetooth module
✎
The Bluetooth module spare part kits do not include a Bluetooth module cable. The Bluetooth module cables are
included in the Cable Kit, spare part number 538465-001.)
Description
Full-sized Bluetooth module
Reduced form factor Bluetooth module
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard and switch cover (see
d. Speaker (see
e. Display assembly (see
f. Top cover (see
4–34
"Battery" on page
"Hard drive" on page
"Optical drive" on page
"Keyboard and switch cover" on page
"Speaker" on page
4-24)
"Display assembly" on page
"Top cover" on page
4-32)
4-6).
4-8)
4-18)
4-25)
Spare part number
398393-002
537921-001
4-20)
Maintenance and Service Guide