Restoring Factory Settings In Computer Setup - HP Compaq 516 Maintenance And Service Manual

Computer Setup
To exit Computer Setup menus, choose one of the following methods:
■
To exit without saving your changes: Click the Exit icon in the lower-left corner of the screen, and then follow
the on-screen instructions.
– or –
Use the tab key and the arrow keys to select File > Ignore changes and exit, and then press
■
To save your changes and exit Computer Setup menus: Click the Save icon in the lower-left corner of the
screen, and then follow the on-screen instructions.
– or –
Use the tab key and the arrow keys to select File > Save changes and exit, and then press
Your changes go into effect when the computer restarts.

Restoring factory settings in Computer Setup

✎
Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1. Turn on or restart the computer, and then press
displayed at the bottom of the screen.
2. Press to enter BIOS Setup.
f10
3. Use a pointing device or the arrow keys to select File > Restore defaults.
4. Follow the on-screen instructions.
5. To save your changes and exit:
Click the Save icon in the lower-left corner of the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press
Your changes go into effect when the computer restarts.
✎
Your password settings and security settings are not changed when you restore the factory settings.
5–2
while the "Press the ESC key for Startup Menu" message is
esc
.
enter
.
enter
.
enter
Maintenance and Service Guide