HP Compaq 516 Maintenance And Service Manual page 69

Removal and replacement procedures
Remove the display assembly:
1. Close the computer.
2. Turn the computer upside down with the front toward you.
3. Remove the WLAN antenna cables 1 from the clip 2 built into the base enclosure.
4. Turn the computer display-side up with the front toward you.
5. Open the computer as far as possible.
6. Disconnect the display panel cable 1 from the system board.
7. Release the display panel cable from the clip 2 built into the top cover.
4–26 Maintenance and Service Guide