Display Assembly - HP Compaq 516 Maintenance And Service Manual

Display assembly

Description
14.0-in, SVA, HD display assembly (includes 2 WLAN antenna transceivers and cables, webcam, microphone, nameplate,
and logo):
For use only on computer models equipped with an AMD processor:
■ AntiGlare display assembly for use only on computer models equipped with a webcam
■ AntiGlare display assembly for use only on computer models not equipped with a webcam
■ BrightView display assembly for use only on computer models equipped with a webcam
■ BrightView display assembly for use only on computer models not equipped with a webcam
For use only on computer models equipped with an Intel processor:
■ AntiGlare display assembly for use only on computer models equipped with a webcam
■ AntiGlare display assembly for use only on computer models not equipped with a webcam
■ BrightView display assembly for use only on computer models equipped with a webcam
■ BrightView display assembly for use only on computer models not equipped with a webcam
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
6. Remove the keyboard and switch cover (see
7. Remove the speaker (see
Maintenance and Service Guide
"Battery" on page 4-6).
"Keyboard and switch cover" on page
"Speaker" on page 4-24).
Removal and replacement procedures
Spare part number
572524-001
572523-001
572526-001
572525-001
538416-001
538415-001
538419-001
538418-001
"WLAN module" on page
4-20).
4-12).
4–25