Product Specifications Overview - Epson TM-P60 Technical Reference Manual

1.4 Product Specifications Overview

Print method
Print density
Printing width (default)
Font
Characters per
line (default)
Character size
(W × H)
Print font Character set
Roll paper
dimensions
(default)
Paper thickness
Paper roll spool
diameter
Specified thermal
Paper paper
Print speed
Interface
Receive buffer
Specified battery
Power AC adapter
consumption (option)
Mechanism
Print head
Life Autocutter
Operation
(Printing quality
guaranteed)
Temperature
/humidity Storage
Overall dimensions (mm)
Mass (approx.)
1-4 General Information
Thermal line printing
203 dpi × 203 dpi [dpi: dots per 25.4 mm (dots per inch)]
52.5 mm, 420 dot positions
Font A: 12 × 24, Font B: 10 × 24, Font C: 8 × 16
Font A: 35, Font B: 42, Font C: 52
Font A: 1.50 × 3.0, Font B: 1.25 × 3.0, Font C: 1.0 × 2.0
95 Alphanumeric, 48 International, 128 × 10 Graphic
57.5 ± 0.5 mm
(59.5 ± 0.5 mm by removing the spacer installed)
50 µm ~ 80 µm
18 mm outside
Original: Kanzaki Specialty Paper (USA):
P350 (paper thickness: 62 µm)
P310 (paper thickness: 58 µm)
P300 (paper thickness: 56 µm)
Maximum 70 mm/s, when number of dots per dot line is 64 dots or
less (printing with a fully charged battery, at 25°C, print density
100%)
IEEE802.11b, RS-232
128 bytes
Lithium-ion battery: Product name: LIP-2500, Trade name: Seiko
Epson Corporation
Output: DC 7.4 V
Capacity: 2200 mAh
Output voltage: DC 12 V
Input voltage: AC 100 V ~ 240 V
Product name: PS-10, Trade name: Seiko Epson Corporation
10,000,000 lines printing
100,000,000 dots
500,000 cuts
5 ~ 45°C, 10 ~ 90% RH
Abnormal operations not found when the printer is left under the
environment of 25°C, 60% RH for 2 hours after it was left in the
following conditions:
High temperature and humidity: 50°C, 90% RH for 120 hours
High temperature: 70°C for 120 hours
Low temperature: -25°C for 120 hours
103 × 159 × 65 (W × D × H)
670 g (including LIP-2500 [battery pack] but not roll paper)
Rev. D