Testing The Headset System In Phone Mode And Adjusting It - Sennheiser Comfort calls Instruction Manual

2
A
Labeling the headset
The name plate or allows you to label the headset.
Change the lettering of the name plate.
The "Nameplate-template.pdf" PDF file included on the CD ROM
allows you to create and print individual name plates.
Swapping the assignment of the AUDIO button
The assignment of the AUDIO button
whether you wear the headset on the right or left ear. By default, the
headset is configured for wearing on the right ear. Pushing the AUDIO
button upwards increases the volume, pushing it downwards reduces
the volume (see page 29).
To swap the assignment of the AUDIO button
Simultaneously press and hold the headset's LINK button
AUDIO button for 5 seconds.
The HEADSET LED flashes blue/red.
Push the AUDIO button
increase the volume until the HEADSET LED
The headset switches to standby mode.
5
5 s
Testing the headset system in
adjusting it
Testing the telephone connection
When PC mode is selected (the LED of the PC button
Press the PHONE button
The base station is set to
»
lights up white.
Putting the headset system into operation
can be swapped depending on
:
in the direction in which you want to
goes off.
4
3
Phone mode and
»
on the base station.
Phone mode and the LED of the PHONE button
and
Right
Left
³
lights up white):
17