Testing The Headset System In Phone Mode And Adjusting It - Sennheiser DW Pro1 Instruction Manual

Push the AUDIO button
increase the volume until the HEADSET LED
The headset switches to standby mode.
5 s
4
5
6
Testing the headset system in
adjusting it
Testing the telephone connection
When PC mode is selected (the LED of the PC button
Press the PHONE button
The base station is set to
»
button lights up white.
Press either the LINK button
»
on the base station.
A wireless link is established between the headset and the base
¿
station, the LINK LED
blue.
¿
Lift the handset (If a handset lifter is connected, it automatically lifts
the handset).
The system is correctly connected if you can hear a clear dial tone and
if the other party can hear you at a comfortable level.
If the audio signal/dial tone is disturbed, adjust the audio signal (see
page 18). If the other party cannot hear you well, adjust the micro-
phone sensitivity (see page 18).
Putting the headset system into operation
in the direction in which you want to
goes off.
Phone mode and
»
on the base station.
Phone mode and the LED of the PHONE
on the headset or the PHONE button
lights up blue and the HEADSET LED
»
4
5
Right
Left
³
lights up white):
flashes
17