Table of Contents
Advertisement
Using the S1 DIGITAL
Using the S1 DIGITAL
Individually adjusting the headset and wearing it
Adjusting the headband
For good noise attenuation and best possible comfort, the headset has to
be adjusted to properly fit your head. To do so, you can adjust the head-
band.
1
Wear the headset so that the headband runs over the top of your head.
2
Adjust the length of the headband so that
– your ears are completely inside the ear pads,
– you feel even, gentle pressure around your ears,
– a snug fit of the headband on the head is ensured.
1
Adjusting the contact pressure
The S1 DIGITAL allows you to choose your preferred contact pressure set-
ting, which offers a good balance between best possible noise attenuation
and still comfortable contact pressure.
In order to achieve greater noise attenuation, a higher contact pressure is
required.
1
Tilt the ear cups by approx. 45° to release the mechanics of the slide
switches.
2
Use the 3-step slide switches to change the contact pressure for each
ear cup.
1
45°
2
2
S1 DIGITAL
| 13
Advertisement
Table of Contents
