Sound; Volume; Mute; Mic - Panasonic PT-VX400 Operating Instructions Manual

Sound

Select [Sound] from the Main Menu (see
"Navigating through the menu" on page 34),
then select the item from the sub-menu.
Remote Control

Volume

1 ) Press ▲▼ to select [Volume] and then
Press the <SELECT> button.
2 ) Press ◄► to adjust the volume.
Operation Adjustment
turn up the
Press ►.
volume
turn down the
Press ◄.
volume
You can also press <VOLUME> (+/-) buttons on
z
the remote control or control panel to adjust the
volume.

Mute

1 ) Press ▲▼ to select [Mute] and then
Press the <SELECT> button.
2 ) Press the <SELECT> button to switch
the mute function On/Off.
Press the <MUTE> button on the remote
z
control to temporarily turn off the sound. To turn
the sound back on, press the <MUTE> button
again or press the <VOLUME> (+/–) buttons.
Control Panel
Adjustment
range
Maximum
value 63
Minimum
value 0

MIC

1 ) Press ▲▼ to select [MIC] and then
Press the <SELECT> button.
2 ) Press ▲▼ to switch the MIC function
On/Off.
When [Off] is selected in [MIC] function, the [MIC
z
gain] and [Standby MIC out] functions are not
available.
If the [MIC] function is turned on when
z
connecting PC audio to the AUDIO IN (a mini
jack), loud sound may be output suddenly
depending on the setting value of [MIC gain].

MIC gain

1 ) Press ▲▼ to select [MIC gain] and
then Press the <SELECT> button.
2 ) Press ◄► to adjust the MIC mixing
gain.
Operation Adjustment
turn up the MIC
Press ►.
mixing gain
turn down the
Press ◄.
MIC mixing gain

Standby MIC out

1 ) Press ▲▼ to select [Standby MIC out]
and then Press the <SELECT> button.
2 ) Press ▲▼ to switch the Standy MIC
out function On/Off.
When setting the [Standby MIC out] function to
z
[On] and in Standby mode status, only [MIC]
input volume can be output.
Only the Standby mode is set to [Network],
z
[Standby MIC out] can be selected.
Sound
Adjustment
range
Maximum
value 63
Minimum
value 0
49
ENGLISH -