Control Panel; Rear Terminals - Panasonic PT-VX400 Operating Instructions Manual

Control panel

(9)
(8)
(7)
(6)
(1) <SELECT> button
Execute the selected item.
(2) ▲▼◄► (VOL -/+) buttons
Navigate the MENU screen.

Rear terminals

(5)
(12)
(1) LAN
Connects to a LAN cable for network connection.
(2) HDMI
Connects to HDMI input signals.
(3) COMPUTER IN 1/ COMPONENT IN
Connects to COMPUTER IN 1/ COMPONENT IN
input signals.
(4) COMPUTER IN 2/ MONITOR OUT
Connects to COMPUTER IN 2/ MONITOR OUT
input signals or outputs the analog RGB signals
input the projector.
(5) AUDIO OUT (VARIABLE)
Outputs the audio signals input to the projector.
(6) Security slot
Attach the commercial shackle lock, manufactured
by Kensington, to protect your projector.
Compatible with the Kensington MicroSaver
Security System.
(5)
(4)
(3)
(2)
(1)
(4)
(11) (10)
(9)
About Your Projector
(3) <INPUT> button
Selects the input signal. (
(4) <ON/STAND-BY> button
Turn the projector on/off.
(5) <POWER> indicator
Indicate the power status.
(6) <MENU> button
Displays the MENU screen. (
(7) <AUTO SETUP> button
Execute the setting of Auto setup in the setting
menu.
(8) <WARNING> indicator
Indicate the abnormal conditions of the projector.
(9) <LAMP REPLACE> indicator
Lights yellow when the projection lamp reaches its
end of life.
(3)
(2)
(7)
(8)
(7) S-VIDEO IN
Connects to S-VIDEO input signals.
(8) CONTROL PORT
Connects to a computer via an RS-232C cable.
(9) AUDIO IN
Connects to the audio input signals.
AUDIO IN has right and left (L and R) terminals.
(10) VIDEO IN
Connects to VIDEO input signals.
(11) COMPUTER AUDIO IN 1
Connects to the audio input signals.
(12) COMPUTER AUDIO IN 2 (MIC IN)
Connects to the audio input signals. Or connect
the MIC to this jack.
Attention
When a LAN cable is directly connected to the projector,
z
the network connection must be made indoors.
page 30)
Æ
page 34)
Æ
(1)
(6)
ENGLISH -
17