Sound; Volume; Mute; Mic - Panasonic PT-VW440U Operating Instructions (Functional Manual)

Sound

Select [Sound] from the Main Menu (see
"Navigating through the menu" on page 36),
then select the item from the sub-menu.
Remote Control

Volume

1 ) Press ▲▼ to select [Volume] and then
press the <ENTER> button.
2 ) Press ◄► to adjust the volume.
Press <ENTER> button to set the volume.
z
Operation Adjustment
turn up the
Press ►.

volume

turn down the
Press ◄.
volume
You can also press <VOLUME +/–> buttons on
z
the remote control or control panel to adjust the
volume.

Mute

1 ) Press ▲▼ to select [Mute].
2 ) Press the <ENTER> button to switch
the mute function [On]/[Off].
Press the <MUTE> button on the remote
z
control also can switch the mute function On/
Off. ( page 35)
Æ
Control Panel
Adjustment
range
Maximum
value 63
Minimum
value 0

MIC

1 ) Press ▲▼ to select [MIC] and then
press the <ENTER> button.
2 ) Press ▲▼ to switch the MIC function
[On]/[Off].
Note
When [Off] is selected in [MIC] function, the [MIC
z
gain] and [Standby MIC out] functions are not
available.
Connect the computer 2 audio input signals to
z
COMPUTER AUDIO IN 1 terminal as the MIC
function is turned on.
If the [MIC] function is turned on when
z
connecting PC audio to the AUDIO IN (a mini
jack), loud sound may be output suddenly
depending on the setting value of [MIC gain].

MIC gain

1 ) Press ▲▼ to select [MIC gain] and
then Press the <ENTER> button.
2 ) Press ◄► to adjust the MIC mixing
gain.
Press <ENTER> button to set the [MIC gain].
z
Operation Adjustment
turn up the MIC
Press ►.
mixing gain
turn down the
Press ◄.
MIC mixing gain

Standby MIC out

1 ) Press ▲▼ to select [Standby MIC out]
and then press the <ENTER> button.
2 ) Press ▲▼ to switch the [Standy MIC
out] function [On]/[Off].
Note
When setting the [Standby MIC out] function
z
to [On] and in Standby mode status, only
[MIC] input volume can be output. Press the
<VOLUME +/-> buttons on the control panel or
on the remote control to adjust the MIC input
volume.
Only the Standby mode is set to [Network],
z
[Standby MIC out] can be selected.
Adjustment
range
Maximum
value 63
Minimum
value 0
51
ENGLISH -