Bandwidth Control - TP-Link L-R480T+ User Manual

4.5.2.2

Bandwidth Control

On this page, you can configure the Bandwidth Control function.
Choose the menu Advanced→Traffic Control→Bandwidth Control to load the following page.
The following items are displayed on this screen:
 Bandwidth Control Rule
Direction:
Group:
Mode:
Guaranteed
Bandwidth (Up):
Limited Bandwidth
(Up):
Figure 4-31 Bandwidth Control
Select the data stream direction for the entry. The direction of arrowhead
indicates the data stream direction WAN-ALL means all WAN ports
through which the data flow might pass. Individual WAN port cannot be
selected after WAN-ALL rules are added.
Select the group to define the controlled users.
Individual: The bandwidth of each user equals to the current bandwidth
of this entry.
Shared: The total bandwidth of all controlled IP addresses equals to the
current bandwidth of this entry.
Specify the Guaranteed Upstream Bandwidth for this entry.
Specify the Limited Upstream Bandwidth for this entry.
-62-