Quick Setup; Network; Wan - TP-Link L-R480T+ User Manual

4.2 Quick Setup

Please refer to the Chapter 3 Quick Installation Guide.

4.3 Network

4.3.1 WAN

4.3.1.1 WAN Mode
TL-R480T+ provides four available WAN ports. You can set the number of WAN ports on this page.
Choose the menu Network→WAN→WAN Mode to load the following page.
 WAN Mode
WAN Ports:
Note:
● By default, TL-R480T+ is set to work in the mode of dual WAN ports.
● Any change to the number of WAN ports may lead to a loss of current configurations. Please be
sure to backup your configurations in advance.
4.3.1.2 WAN1
TL-R480T+ provides the following six Internet connection types: Static IP, Dynamic IP, PPPoE/Russian
PPPoE, L2TP/Russian L2TP, PPTP/Russian PPTP and BigPond. To configure the WAN, please first
select the type of Internet connection provided by your ISP (Internet Service Provider).
Figure 4-2 WAN Mode
Select the total number of WAN ports you prefer to use.
And the router will adjust the physical ports accordingly,
which can be illustrated on the following port sketch.
-18-