Preset Memory; Preset Tuning - Kenwood KDC-BT838U Instruction Manual

Preset Memory
Putting the channel in the memory.
1
Select the channel to put in the memory
Push the Control knob towards right or left.
2
Enter Preset Memory mode
Select
"P.MEM'~
For how to select Function Control item, refer to
<Function Control> (page 6).
3
Select the number to put in the memory
Turn the Control knob or push it towards up or
down.
4
Determine the number to put in the memory
Press the Control knob.
S
Allow the determined number to take effect
Press the Control knob.
Cancelling
the Preset Memory
mode
Press the [FNC] button.
~
~
• Only the channel number is stored. Category information
is not stored.
Preset Tuning
Recalling the channels in the memory.
1
Enter Preset Tuning Select mode
Turn the Control knob.
A list is displayed.
2
Select a desired station in the memory
Turn the Control knob or push it towards up or
down.
3
Recall the station
Press the Control knob.
Cancelling
Preset
Tuning
Press the [FNC] button.
English I
29