Tuner Operation; Station Preset Memory; Preset Tuning; Direct Access Tuning - Kenwood KDC-BT838U Instruction Manual

Tuner Operation
Station Preset Memory
Putting a station in the memory.
1
Select the frequency to put in the memory
Push the Control knob towards right or left.
2
Enter Preset Memory mode
Select
"P.MEM'~
For how to select Function Control item, refer to
<Function Control> (page 6).
3
Select the number to put in the memory
Turn the Control knob.
4
Determine the number to put in the memory
Press the Control knob.
S
Allow the determined number to take effect
Press the Control knob.
Cancelling the
Preset Memory mode
Press the [FNC] button.
Preset Tuning
Recalling the stations in the memory_
1
Enter Preset Tuning Select mode
Turn the Control knob.
A station list is displayed.
2
Select a desired station in the memory
Turn the Control knob.
3
Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [FNC] button.
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"- - - -" is displayed.
2
Enter the frequency
Press the number buttons on the remote
control.
Example:
Cancelling
Direct
Access Tuning
Press the [DIRECT] button on the remote
control.
Q
~
• You can enter the FM band frequency in steps of a
minimum of 0.1 MHz.
English
I 13