Maintenance - Extech Instruments MultiPro MP510 User Manual

RS-232 PC Interface
This instrument is equipped with an optically isolated interface port
(located on the rear of the meter). An optional Windows
(part no. SW800) and interface package is available for data
acquisition applications. This optional kit is required to connect the
meter to a PC. The software provides digital, analog, and graphical
data displays. Refer to the README file in the interface kit for further
details.

Maintenance

WARNING
To avoid electrical shock, disconnect the meter from any circuit, remove
the test leads from the input jacks and turn OFF the meter before opening
the case. Do not operate with open case. Install only the same type of
fuse or equivalent
Cleaning and Storage
Periodically wipe the case with a damp cloth and mild detergent; do not
use abrasives or solvents. If the meter is not to be used for periods of
longer than 60 days, remove the battery and store it separately
14
TM
software