Maintenance - Extech Instruments MiniTec MN36 User Manual

Maintenance
WARNING: To avoid electric shock, disconnect the test leads from any source of voltage
before removing the battery/fuse cover.
WARNING: To avoid electric shock, do not operate your meter until the battery/fuse cover is in
place and fastened securely.
This Multimeter is designed to provide years of dependable service, if the following care
instructions are performed.
1.
Keep the meter dry.
2.
Use and store the meter in mild ambient conditions. Temperature extremes can shorten the life
of the electronic parts and distort or melt plastic parts.
3.
Handle the meter gently. Dropping it can damage the electronic parts or the case.
4.
Keep the meter clean. Wipe the case occasionally with a damp cloth. DO NOT use chemicals,
cleaning solvents or detergents.
5.
Use only fresh batteries of the recommended size and type. Remove old or weak batteries so
they do not leak and damage the unit.
6.
If the meter is to be stored for a long period of time, the batteries should be removed to prevent
damage to the unit.
800.561.8187
5
www. .com
MN35-EU-EN V2.3 4/13
information@itm.com