To Create A Custom Workout - NordicTrack COMMERCIAL 1500 User Manual

HOW TO CREATE A CUSTOM WORKOUT
1. Insert the key into the console.
See step 1 on page 14.
2. Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET-
TINGS on page 13.
3. Select a custom workout.
To select a custom workout, press the Custom but-
ton until the name of the desired workout appears
in the display.
When a custom workout is selected, the display will
show the name, duration, maximum incline setting,
and maximum speed setting of the workout. In ad-
dition, a profile of the speed settings of the workout
will appear in the display.
If the custom workout has not yet been defined,
the display will show a workout time of three
minutes. If the workout time is more than three
minutes, see HOW TO USE A CUSTOM WORK-
OUT on page 19.
Each custom workout is divided into one-minute
segments. One speed setting and one incline set-
ting can be programmed for each segment.
4. Start the walking belt.
Press the Start button to start the workout. A mo-
ment after you press the Start button, the walking
belt will begin to move. Hold the handrails and
begin walking.
To program a speed setting and an incline setting
for the first one-minute segment of the workout,
simply adjust the speed and incline of the treadmill
as desired by pressing the speed and incline but-
tons.
When the first segment ends, a series of tones will
sound and the current speed and incline settings
will be saved in memory.
Program a speed setting and an incline setting for
the second segment as described above. Continue
programming speed and incline settings for up to
30 segments.
When you are finished with your workout, press the
Stop button twice. The custom workout will then be
saved in memory.
5. Select a display mode and monitor your
progress with the display and the intensity level
bar.
See step 5 on page 17.
6. Measure your heart rate if desired.
See step 7 on page 16.
7. Turn on the fan if desired.
See step 8 on page 16.
8. When you are finished exercising, remove the
key from the console.
See step 9 on page 16.
18