Extech Instruments EN300 User Manual

Extech Instruments EN300 User Manual

5 in 1 environmental meter, anemometer, humidity meter, light meter, thermometer, sound level meter

Advertisement

5 in 1 Environmental Meter
Model: EN300
Anemometer
Humidity Meter
Light Meter
Thermometer
Sound Level Meter
User's Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EN300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Extech Instruments EN300

  • Page 1 User's Guide 5 in 1 Environmental Meter Model: EN300 Anemometer Humidity Meter Light Meter Thermometer Sound Level Meter...
  • Page 2: Common Features

    Introduction Congratulations on your purchase of this Extech Meter. The EN300 is five professional meters built into one convenient package. This meter ships fully tested and calibrated and, with proper use, should provide many years of reliable service. Features This 5-in-1 professional measuring instrument provides the following functions: Anemometer uses a low-friction ball bearing mounted wheel design for high accuracy.
  • Page 3: International Safety Symbols

     Expired or damaged batteries can cause cauterization on contact with the skin. Always, therefore, use suitable hand gloves in such cases  See that the batteries are not short-circuited. Do not throw batteries into the fire. EN300-EU-EN v1.3 4/14...
  • Page 4: Meter Description

    Unit / Zero Button Air Speed Sensor Thermocouple Input Socket l RS-232 Output Terminal 10. DC power adaptor socket 11. Max. / Min. Button 12. Function Button 13. °C/°F Button/Lux/Ft-cd Button 14. On rear: Battery Compartment, Tripod mount, Stand EN300-EU-EN v1.3 4/14...
  • Page 5: Operation

    Therefore, allow time for thermal equalization between probe plug and meter input socket. The thermal equalization procedure takes few minutes and should be applied only when the probe has been exposed to ambient temperature different from the meter EN300-EU-EN v1.3 4/14...
  • Page 6: Light Measurement

    Select the Sound Level function by pressing the "Function Button" until the Sound level unit (dB) is displayed. Hold the instrument in one hand and point the microphone towards the noise source. The sound level value (dB) will be displayed on the LCD. EN300-EU-EN v1.3 4/14...
  • Page 7: Hold Function

    You can hand over your used batteries / accumulators at collection points in your community or wherever batteries / accumulators are sold Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the end of its lifecycle EN300-EU-EN v1.3 4/14...
  • Page 8: General Specifications

    Type K Thermocouple Thermometer Units Range Resolution Accuracy ± (1% rdg + 2°F) -148 to 2372 °F 0.1°F °F -100 to 1300 °C ± (1% rdg + 1°C) 0.1°C °C Note: The type K thermocouple probe is optional EN300-EU-EN v1.3 4/14...
  • Page 9 Note: Stated specification tests under the environment RF Field Strength less than 3 V/M & frequency less than 30 MHz only Note: Specification stated for 23± 5°C                       Copyright © 2014 FLIR Systems, Inc.  All rights reserved including the right of reproduction in whole or in part in any form  ISO‐9001 Certified  www.extech.com  EN300-EU-EN v1.3 4/14...

Table of Contents

Save PDF