Table of Contents
Advertisement
Mechanical Disassembly
Mechanical disassembly should be made following procedures in numerical or-
der.
Following steps show the basic procedures, therefore unnecessary step may
be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original
otherwise it may cause loss of performance and product safety.
z Cabinet Top, Front, R/C Board removal
1. Remove the cabinet top (Before removing the cabinet top,
open the Lens cover fully).
. Remove the Cabinet front.
R/C Board
Lens cover
Cabinet front
(M.5x6)x
((Tx6)
(M.5x6)
-1-
Screws Expression
(Type
) mm
Diameter x Length
T type
M Type
(T3x10)(Black)x5
Cabinet top
Fig.1
Advertisement
Table of Contents
