Internet/Phone Control Of The Programmable Output - TOTALINE P374-2900 Owner's Manual

Internet/Phone Control of the Internet/Phone Control of the
Programmable Output Programmable Output
To operate one of the MISC outputs using Internet/phone-based
operation, program Advanced Setup step #30 for Aux
This terminal is especially useful for devices that can be energized
via the Internet. Telephone control may also be available when the
thermostat is connected to the Internet.
Possible REMOTE scenarios:
1) Arm the alarm system in your building after you have left for
the day.
2) Turn off your sign lights after arriving home.
3) Turn on your interior lights while you're closed.
Press the MODE button. While holding
MODE
the MODE, press the PROGRAM
button to enter Setup screens.
PROGRAM
Press the MODE button repeatedly
MODE
until this setup screen appears.
I8:88
88
OFF Time = Temp =
Press the UP button three
times to set the
programmable output
for Aux (web-based
operation).
Programmable Output Polarity:
NC
NO = Normally Open to operate
when programmed to be ON
through the phone or internet.
NC = Normally Closed to operate
when programmed to be OFF
through the phone or internet.
NO
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
(below)
Note: Press the
button momentarily
to move through the
setup screens. Press
and hold the
button to move back-
wards through the
setup screens.
Aux
30
Setup
Remote
3 i
Setup
Page 14.7
TOTALINE
.
MODE
MODE
14
Press
MODE
Press
PROGRAM