TOTALINE P374-2900 Owner's Manual page 28

Viewing the Indoor Humidity Viewing the Indoor Humidity
Requires the Humidity Module (optional accessory) to be
installed. To display the current humidity at the thermostat,
press the HUMIDITY button of the thermostat. The display will
then show the current indoor humidity along with the humidification
setpoint (Section 9).
Note: The humidity reading will not appear unless the Humidity
Module has been installed. If a sensor has not been installed
dashes will appear in place of the humidity reading.
To view the indoor humidity
HUMIDITY
reading, press the
HUMIDITY button
Current Room Humidity
Press the HUMIDITY button
again to return the display
to normal operation.
NOTE: Due to variations in environmental conditions, it is not always possible
to achieve the desired humidification or dehumidification setpoint.
TOTALINE
I
40
0
Setup
Humidify
Page 5.3
5
Press
HUMIDITY