TOTALINE P374-2900 Owner's Manual page 103

Viewing the Remote Temperature Sensors Viewing the Remote Temperature Sensors
Because e ach sensor has a "hard-coded" address programmed
internally, the thermostat "scans" for sensors from lower addresses to
higher addresses. Therefore, in order to determine which sensor
corresponds to the number on the setup screen you will need to
disconnect each sensor from the group.
MODE Press the MODE button. While holding the MODE,
press the PROGRAM button to enter Setup screens.
PROGRAM
Press the MODE button repeatedly
MODE
until setup step #48 appears.
Remote
Sensor #1.
Remote
Sensor #2
Remote
Sensor #3
Remote
Sensor #4
Remote
Sensor #5
22
Note: Press the
button momentarily
to move through the
setup screens. Press
48
and hold the
button to move back-
wards through the
setup screens.
Remote
0 i
Remote
Sensor #6
48
Remote
02
Remote
Sensor #7
48
Remote
03
Remote
Sensor #8
48
Remote
04
PROGRAM
Press the MODE button to
return to normal operation.
48
Remote
05
Page 22.4
TOTALINE
MODE
MODE
48
Remote
06
48
Remote
07
48
Remote
08