Advertisement
OWNER'S MANUAL
Programmable
Digital Thermostat
Easy
TOTALINE
7:00
68
Am
HEAT
72
WAKE
*
Use with most Air Conditioning & Heating Systems including: 1 or 2 Stage
Electric Cooling & Gas Heating, Heat Pump, Electric or Hydronic Heat.
TOTALINE
Carrier Corporation 10/01
P374-1100EZ
STAT
Easy To Read Display
Thermoglow
Backlight
Remote Sensor Ready
Multi-Stage, One for All
Advertisement
Table of Contents
Related Manuals for TOTALINE Easy Stat
Summary of Contents for TOTALINE Easy Stat
- Page 1 OWNER'S MANUAL P374-1100EZ Programmable Digital Thermostat Easy STAT TOTALINE Easy To Read Display 7:00 HEAT Thermoglow Backlight WAKE Remote Sensor Ready Multi-Stage, One for All Use with most Air Conditioning & Heating Systems including: 1 or 2 Stage Electric Cooling & Gas Heating, Heat Pump, Electric or Hydronic Heat.
-
Page 2: Table Of Contents
Table Of Contents FRONT PANEL DISPLAY QUICK START Set the clock and go BASIC OPERATION PROGRAMMING 2 Time Periods ADVANCED SETUP ABOUT ADVANCED OPERATION WARRANTY CAUTION Follow Installation Instructions before proceeding. SET THERMOSTAT TO MODE “OFF” PRIOR TO CHANGING SETTINGS IN SETUP OR RESTORING FACTORY DEFAULTS. -
Page 3: Front Panel
Front Panel Backlit LCD Display TOTALINE 12:00 Warmer or + Button HEAT WAKE Cooler or - Button Mode/ Next Button Heat or Cool Indicator Red = Heat, Green = Cool Easy STAT RESIDENTIAL 12:00 HEAT WAKE PROGRAM OUTSIDE MODE/NEXT PROGRAM... -
Page 4: Display
Display 12:00 COOL HEAT SLEEP WAKE SIDE Mode Indicators Selects the operation mode of the equipment. WAKE/SLEEP - indicates the stored program is running. HEAT - indicates the heat mode. COOL - indicates the air conditioning mode. OFF - indicates the entire system is turned off. Clock Display Indicates the current time of day. -
Page 5: Quick Start Set The Clock And Go
Quick Start Set the Clock and Go During Setup & Programming: Pressing the Up and Down SET CLOCK buttons will modify the flashing selection. Press the SET CLOCK button. (Represented in dark black) To adjust the 12:00 clock use buttons. To adjust just the Hours;... -
Page 6: Basic Operation
Basic Operation Select Desired Temperature In any mode, adjust the desired Set Temperature with 12:00 HEAT buttons. Pressing the up/down buttons in Heat or Cool modes will adjust only the heat or cool set temperature. Press Operation 12:00 Fan On indicates constant fan operation. This feature is active even if the thermostat is set to Off. - Page 7 Basic Operation Select Mode 12:00 HEAT The HEAT setting indicates the temperature the room has to reach before the furnace will turn on to heat the room. Press MODE/NEXT 12:00 COOL The COOL setting indicates the temperature the room has to reach before the air conditioner will turn on to cool the room.
-
Page 8: Programming 2 Time Periods
Programming Heat Schedule TOTALINE 6:03 CCUPIED The thermostat must be in the Heat mode to access these setup steps. AUTO Press the Set Program button. PROGRAM 7:00 Select the start time for Wake. WAKE Press MODE/NEXT 7:00 HEAT Adjust the heating WAKE setpoint for Wake. - Page 9 Programming HEAT-COOL TOTALINE 6:03 CCUPIED The thermostat must be in the Cool mode to access these setup steps. AUTO Press the Set Program button. PROGRAM 7:00 Select the start time for Wake. WAKE Press MODE/NEXT 7:00 COOL Adjust the cooling WAKE setpoint for Wake.
-
Page 10: Advanced Setup
Advanced Setup Press the Mode/Next button. NOTE: Each step # is located at While holding the Mode/Next, MODE/NEXT the bottom right corner of the press the Program On / Off display for easy reference. PROGRAM button to enter Setup ON / OFF screens. - Page 11 Advanced Setup Select Electric Heat Yes if the strip heater is your First Stage of heat. (Step 6 only appears if step 4 is Yes for heat pump). Press MODE/NEXT Adjust the deadband from 1 - 6 degrees. Press MODE/NEXT Select the cycles per hour limit.
-
Page 12: Advanced Setup Table
Advanced Setup Advanced Setup Table Step # Description Range Factory Default Time of day clock set 24 hour 12:00 Am Thermoglow backlight Yes/No Heat Cool Heat/Cool Heat/Cool Configure for Heat Pump Yes/No Reversing Valve polarity O / B Electric Heat Yes/No Deadband, Temperature swing 1 - 6... -
Page 13: About Advanced Operation
About Advanced Features & Operation MEMORY BACKUP - In the event of a power loss, the thermostat will retain the stored program settings without external power or batteries. 2 STAGE OPERATION - The 2nd Stage of heat or cool is turned on when (1) the 1st Stage has been on for a minimum of two minutes, and (2) the temperature spread from the setpoint is equal to or greater than: the setpoint... - Page 14 About Advanced Features & Operation ELECTRIC HEAT - Selecting Electric Heat on, page 9, step 6, will cause the thermostat to turn on the fan immediately any time there is a heat demand. Since all gas furnaces control the fan, this feature should be off unless the heater is only electric.
- Page 15 About Advanced Features & Operation The most common way to program the EasyStat thermostat is to program it just as you would an alarm clock. You program the stat in the HEATING MODE, normal winter operation, and you can also program it in the COOLING MODE, normal summer operation.
- Page 16 About Advanced Features & Operation Simply turn the thermostat down when you go to bed at night and then you wake up to a comfortable temperature. Turn the thermostat down when you leave for work and you will return to a comfortable temperature when you get home, at the same time receive the large energy savings, up to 30%, of not having your house heated or cooled when you are not there.
-
Page 17: Warranty
Warranty One-Year Warranty - This Product is warranted to be free from defects in material and workmanship. If it appears within one year from the date of original installation, whether or not actual use begins on that date, that the product does not meet this warranty, a new or remanufactured part, at the manufacturer’s sole option, to replace any defective part will be provided without charge for the part itself;...