Fingertip Blood Measurment - Omron HGM-112 Instruction Manual

BLOOD GLUCOSE MONITORING SYSTEM-HGM-112
3.2 Fingertip blood measurement
Structure:
Adjustable tip
A. Install the Lancet
1. Unscrew the adjustable tip of the lancing advice.Install a new lancet
into the carrier correctly and make sure it is fully seated. Then remove
the protective cap and replace the adjustable tip.
2. Adjust the puncture depth by the selection dial (Normally at the 2nd
level), twist to a suitable number. (Smaller numbers are for shallower
punctures and larger numbers are for deeper puncture)
a. Unscrew the adjustable tip
of lancing device
c. Twist off the protective cap
from the lancet.
8
AST Cap
Carrier
Trigger
Ejector
b. Install the lancet.
d. Replace the adjustable tip of
lancing device and adjust the
puncture depth.
Barrel