Table of Contents
Advertisement
OMRON blood glucose monitoring system HEA-232.indd 7
Chapter 3 Finger Blood Glucose Testing
3.1 Preparation before glucose testing
Please prepare materials you need as listed below and read this
manual to ensure the correct measuring process and results.
□ Blood Glucose Meter.
□ Blood Glucose Test Strip.
□ Lancing Device.
□ Lancet
3.2
Fingertip blood measurement
Structure:
Cap
Adjustable tip
A. Install the Lancet
Check if lancet is new before installing it to the lancet holder and
ensure it is fully seated. Then remove the protective cap.
Adjust the puncture depth by selection dial (normally at 2nd level), twist
to suitable number (smaller number for a shallower puncture and a
larger number for a deeper puncture depth).
a. Remove the cap by twisting it
c. Twist the protective cap of lancet
Ejector
Carrier
Trigger
b. Install the lancet
d. Remove the cap if lancing
device and adjust the puncture
depth
Barrel
7
2012/6/13 下午 06:44:23
Advertisement
Table of Contents
