Operator Menus - IBM TotalStorage 3590 Operator's Manual

Operator Menus

Operator menus are available at the successful completion of the power-on
self-test (POST).
Options Menu
Table 6 shows the Options menu.
Table 6. Options
Function
Start/Allow Load
(Model C12/C14
only)
Set ACF Mode...
Unload Drive
Services...
Note: Supplemental Message Line 1: <none> Supplemental Message Line 2: <none>
Start Enables the ACF on Models E11 or B11. This function cannot be
selected on Models E1A or B1A.
Allow Load
Allows loading cartridges when the 3590 Model C12 or C14 is in
manual mode.
Set ACF Mode
Sets the ACF mode for Models E11 and B11.
Unload Drive
Causes the device to rewind and to unload the cartridge in the device.
Services
Allows the operator to perform configuration tasks, such as setting the
SCSI online and offline.
Next Menu
—
"Set ACF Mode Menu" on page 32
—
"Services Menu" on page 33
Chapter 3. Drive Operator Panel and Controls
31