Section 3: Subsystem Operator Functions
Inserting Tape Reel In Cartridge
Load Procedure
1. Open cartridge toggle.
2. Holding cartridge vertical, insert reel as shown. Be sure tape end hangs free.
If
necessary, expand cartridge to accept reel.
3. Close cartridge toggle.
Cartridge
Toggle
Leading End
of Tape
Figure 7. Inserting Tape Reel in Cartridge
1. Place reel against hub flange.
When mounting reel, rotate reel to position leading end of tape in center of
threading chute.
When mounting cartridge, seat opening pin in cartridge toggle.
2. Press
LOAD/REWIND
and
START.
(No Cartridge)
Figure 8. Load Procedure
Tape Positioned in
Threading Chute
Section 3: Subsystem Operator Functions
29