KYMCO MXU 150 Service Manual page 15

1
. GENERAL INFORMATION
„ After routing, check that the wire
harnesses are not twisted or kinked.
„ Wire harnesses routed along with
handlebar should not be pulled tight, have
excessive slack or interfere with adjacent
or surrounding parts in all steering
positions.
„ When a testing device is used, make sure
to understand the operating methods
thoroughly and operate according to the
operating instructions.
„ Be careful not to drop any parts.
„ When rust is found on a terminal, remove
the rust with sand paper or equivalent
before connecting.
1-11
ATV 150/125
Do you understand
the instrument? Is the
instrument set
correctly?
Remove Rust !