KYMCO MXU 150 Service Manual page 10

1
. GENERAL INFORMATION
„ Apply or add designated greases and
lubricants to the specified lubrication
points.
„ After reassembly, check all parts for
proper tightening and operation.
„ When two persons work together, pay
attention to the mutual working safety.
„ Disconnect the battery negative (-)
terminal before operation.
„ When using a spanner or other tools,
make sure not to damage the motorcycle
surface.
„ After operation, check all connecting
points, fasteners, and lines for proper
connection and installation.
„ When connecting the battery, the positive
(+) terminal must be connected first.
„ After connection, apply grease to the
battery terminals.
„ Terminal caps shall be installed securely.
ATV 150/125
1-6