Usb Controller; Usb Keyboard Support; Usb Mouse Support; Init Display First - Aaeon SBC-659P User Manual

IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard
drive supports it and the operating environment includes a DMA
driver (Windows 95 OSR2 or a third-party IDE bus master driver).
If your hard drive and your system software both support Ultra
DMA/33, select Auto to enable BIOS support.
The choices: Auto, disable

USB Controller

Select Enabled if your system contains a Universal Serial Bus
controller and you have USB peripherals.

USB Keyboard Support

Select Enabled if your system contains a Universal Serial Bus
controller and you have a USB keyboard.

USB Mouse Support

Select Enabled if your system contains a Universal Serial Bus
controller and you have a USB mouse.

Init Display First

This item allows you to active PCI slot or onboard first.
The choice: PCI slot, onboard

AC97 Audio

The default setting of Auto enables the AC97 audio if it is detected
onboard

IDE HDD Block Mode

Select Enabled only if your hard drives support block mode.
Power on Function
Select the different manners for powering on the system.
The choices: Keyboard 98, password, any key, hot key, button
only, mouse click, mouse move.
Chapter 3 Award BIOS Setup 59