Hayter Spirit 41 Owner's Handbook Manual page 29

111-1095 (B) 7/11/08
PROBLEM
Engine vibrates excessively
Uneven cut
Discharge chute blocks
Mower is hard to push
Poor grass collection
1:44 pm Page 1.29
TROUBLE SHOOTING
POSSIBLE FAULT
Mounting bolts loose.
Cutterblade bolt loose.
Cutterblade out of balance.
Bent crankshaft.
Undulating ground conditions
Cutterblade worn
Cutterblade out of balance
Wheels / roller damaged
Grass is wet
Cut height too low
Grassbag full
Airflow through the
grassbag is restricted
Cut height too low
Wheels / roller damaged
Airflow through the
grassbag is restricted
Discharge chute blocked
Wet grass
Grassbag full
REMEDY
Tighten bolts
Tighten bolt
Balance cutterblade
Consult your dealer
Change direction of travel
Sharpen the cutterblade
Balance the cutterblade
Inspect and replace as necessary
Mow dry grass
Increase cut height
Empty grassbag
Clean the grassbag
Increase cut height
Inspect and replace as necessary
Clean the grassbag
Remove blockage
Mow dry grass
Empty grassbag
1.29