Assembling The Mower; Delivery Checklist; Handlebar; Grassbag Assembly - Hayter Spirit 41 Owner's Handbook Manual

111-1095 (B) 7/11/08

ASSEMBLING THE MOWER

2
1
1.12
1:44 pm Page 1.12

Delivery Checklist

Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Grassbag.
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.

Handlebar

Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Move the engine stop lever away from the engine to avoid
damage and unfold the handlebar to the operating position. Make sure
the knobs are assembled to the outside of the handlebar and tighten to
secure in position.
Take care to ensure that the control cables do not become snagged at
the pivot point.

Grassbag Assembly

(1) Insert metal frame into grassbag fabric and (2) Clip into position.

Grassbag Attachment

Raise the rear deflector, lower the grassbag through the handlebar and
hook in position. Lower the deflector to rest on the grassbag
2. Grassbag Frame