Surround Panel Installation - Travis Industries 1250 Owner's Manual

12 Fireplace Insert Installation

Surround Panel Installation

Rectangular Panels:
SURROUND PANEL SIZE
8"
10"
Installation Instructions
1. With the insert 12" from the fireplace, install the side surround panels (see the directions below).
ANSWER ONLY:
Remove and discard the
button plugs from both sides
of the insert.
2. Adjust the position of the side panels so they are: 1) flush with the bottom of the insert; 2) both the
same distance back from the front of the insert; 3) perpendicular to the floor (use the top panel, if
necessary, to judge alignment). Tighten the screws that hold the side panels in place.
© Travis Industries
(for qualified installers only)
HEIGHT WIDTH
28-1/4" 718mm 40-1/8" 1020mm
30-1/4" 769mm 44-1/8" 1121mm
100-01233
HINT:
Pre-thread the holes on the
insert with the screws.
Attach the side surround
panels with the included
screws.
4110304