Quick Reference Guide - Directed Electronics AM2 Owner's Manual

QUICK REFERENCE GUIDE

To lock using your remote
To lock the system press
The LED will begin to flash. The Failsafe
the vehicle's starter from cranking. To confirm system locking the vehicle's
horn (if connected) honks once and the parking lights flash once.
To unlock using your remote
To unlock the system press
connected). The Failsafe
vehicle's horn (if connected) honks twice and the parking lights flash twice.
®
Disabling the Failsafe Starter Kill without a transmitter
Turn on the ignition. Press and release the integrated LED/Valet
within 10 seconds. The LED will stop flashing and the vehicle can be started.
To enter or exit Valet ® Mode
1. Turn the ignition to the ON position.
2. Turn the ignition back OFF.
3. Within 10 seconds press and release the integrated LED/Valet
The status LED lights continuously if you have entered Valet
®
exit Valet Mode, repeat steps 1–3. The LED turns off when exiting Valet
Mode.
To activate Panic Mode
Press and hold for 2 seconds.
To exit Panic Mode
Press on the transmitter.
Location of integrated LED/Valet
for one second. The doors lock (if connected).
Starter Kill (if installed) prevents
®
for one second. The doors will unlock (if
®
Starter Kill deactivates. To confirm unlocking the
® Switch______________________
®
switch
®
switch.
®
Mode. To
®